Link Tree
Walking Stick
(2023)
Constructed by Connor Petrella
Magic Wand
(2024)
Constructed by Clayton Petrella
Back of chair spindle carved and sanded.
Double Headed Axe
(2022)
Constructed by Clayton Petrella
Collapsable scyth
(2022)
Constructed by: Clayton Petrella
Dead Rat
(2023)
Constructed by: Connor Petrella
EOS SIX Syringe Gun
(2022)
Designed by: Clayton and Connor Petrella
Directed by: Franklin Carpio
Eyeris
(2022)
Directed by: Brandon Unis
Sci-Fi Device and Chip
Designed and Constructed by: Clayton and Connor Petrella
Makeup applied by: Carah Cafin
Little Shop of Horrors
(Fall 2021)
Props designed by Wendy Akers.
Created By Connor and Clayton Petrella
The Syringe Gun as seen in the yet to be released short film "EOS Six"
Luke Skywalkers Green Lightsaber
(2021)
Inspired by designs from Lucasfilm.
Created By Clayton Petrella
Apocalyptic Torches
(Spring 2021)
Props designed by Wendy Akers.
This torch was constructed by Clayton and Connor Petrella
Roman Map
(2021)
Designed by: Wendy Akers
Created By :Clayton petrella
Sword Prop
Designed By: Connor and Clayton Petrella
Created By: Connor and Clayton Petrella
(2021)
Lord of the Rings inspired Jewelry
(2021)
Design inspired by Weta Workshop
Created By Clayton Petrella
For my Angel Crown, I was looking to interpret this golden circle as a crown, or halo, that was worn by angels.
Wizard Staff
Designed By: Clayton Petrella
Created By: Clayton Petrella
(2020)
Wizard Staff
Designed By: Connor and Petrella
Created By: Connor Petrella
(2020)
"Glass Menagerie"
Designed By: Wendy Akers
Resin Casted Figures
(2020)
Japanese Menpo Mask
(Spring 2020)
Designed and constructed by Connor Petrella
Italian Masquerade Mask
(Spring 2020)
Designed and constructed by Clayton Petrella
Grogu "Baby Yoda" Doll
Spring 2020
Inspired from designs by Lucasfilm Ltd. and constructed by Clayton and Connor Petrella
A Japanese Menpo Mask made from a paper mache masquerade mask.
A Japanese Menpo Mask made from a paper mache masquerade mask.
Youtube Tutorial linked below
Baby Yoda as he appears in "The Mandalorian" TV Show.
Youtube Tutorial linked below
Pirate Fantasy Map
(2020)
Constructed by Clayton Petrella
Frankenstein's Fist
(2020)
Designed by Clayton Petrella.
This map was made during the Fall of 2020 and was a school project. We where tasked with creating a treasure map with a specific amount of things on it. This is the process of how I made my map. The final product of my custom treasure map. To watch a tutorial video of how I made this, click the link below.
This map was made during the Fall of 2020 and was a school project. We where tasked with creating a treasure map with a specific amount of things on it. This is the process of how I made my map. When creating this map, I took heavy inspiration from the author of The Lord of The Rings, J.R.R. Tolkien. I bought a heavy drop cloth from Home Depot to use as my canvas. To watch a tutorial video of how I made this, click the link below.
This map was made during the Fall of 2020 and was a school project. We where tasked with creating a treasure map with a specific amount of things on it. This is the process of how I made my map. Wide angle shot before I put the finishing touches on. To watch a tutorial video of how I made this, click the link below.
This map was made during the Fall of 2020 and was a school project. We where tasked with creating a treasure map with a specific amount of things on it. This is the process of how I made my map. The final product of my custom treasure map. To watch a tutorial video of how I made this, click the link below.
Dracula's Tomb Stone
(2020)
Designed By: Connor Petrella
Frankenstein's Tombstone
(Fall 2020)
Designed by Clayton Petrella.
Weathered Gramophone
(2020)
Weathered By Connor Petrella
A tombstone prop I had made out of green insulation foam, carved with a wood burner, and painting with latex house paint.
A tombstone prop I had made out of green insulation foam, carved with a wood burner, and painting with latex house paint.
Recreation of Historical Documents
Created By: Connor and Clayton Petrella
(2020)
This fake historical document was created during the Fall of 2020, and made to look like the newspaper that reported the death of Blackbeard the Pirate. To see how I made this prop, click the link below
This fake historical document was created during the Fall of 2020, and made to look like the newspaper that reported the death of Blackbeard the Pirate. To see how I made this prop, click the link below
This fake historical document was created during the Fall of 2020, and made to look like the newspaper that reported the death of Blackbeard the Pirate. To see how I made this prop, click the link below
This fake historical document was created during the Fall of 2020, and made to look like the newspaper that reported the death of Blackbeard the Pirate. To see how I made this prop, click the link below
Fabric Fantasy Map
(2020)
Tea Stained "Parchment" Paper
(2020)
A fantasy map I created using black acrylic paint, and a piece of canvas drop cloth.
A fantasy map I created using black acrylic paint, and a piece of canvas drop cloth.
This is a FAKE dollar bill prop that I made for my theater class in the fall of 2020. This is 100% fake and I have no intention to use this as actual currency. The first thing I did was scan a real 20 Dollar Bill in my printer, and uploaded it into photoshop. I then changed alot of the text to make it a parody of an actual dollar bill. To see a tutorial video of this prop, click the link below.
This is a FAKE dollar bill prop that I made for my theater class in the fall of 2020. This is 100% fake and I have no intention to use this as actual currency. The first thing I did was scan a real 20 Dollar Bill in my printer, and uploaded it into photoshop. I then changed alot of the text to make it a parody of an actual dollar bill. To see a tutorial video of this prop, click the link below.
This is a FAKE dollar bill prop that I made for my theater class in the fall of 2020. This is 100% fake and I have no intention to use this as actual currency. This is an upclose look at the fake dollar bill, and is a good representation of how much detail was able to be printed. To see a tutorial video of this prop, click the link below.
This is a FAKE dollar bill prop that I made for my theater class in the fall of 2020. This is 100% fake and I have no intention to use this as actual currency. The first thing I did was scan a real 20 Dollar Bill in my printer, and uploaded it into photoshop. I then changed alot of the text to make it a parody of an actual dollar bill. To see a tutorial video of this prop, click the link below.
Metal Coin
Designed By: Connor Petrella
(2020)
Magic Wand
Made By: Connor Petrella
(2020)
Cabaret Lamps
(2019)
Props designed by Wendy Akers
Created By Clayton petrella
A Magic Wand prop my dad made out of a leg chair and a chop stick that I re purposed. i started by sanding off the yellow and green spray paint, and then adding a dark wood stain finish.
A Magic Wand prop my dad made out of a leg chair and a chop stick that I re purposed. i started by sanding off the yellow and green spray paint, and then adding a dark wood stain finish.
Promotional set photo featuring my lamp
A simple lamp was purchased online, and using a mixture of paint, I put a color overtop.
Completed paint jobs.
Promotional set photo featuring my lamp
1939 Berliner Newspaper
(Fall 2019)
Designed By Connor Petrella
1929 Doorkaat Schnapps
Designed by Clayton Petrella.
Created By Clayton Petrella
(2019)
1933 Booths Gin Bottle Label
(Fall 2019)
Designed by Clayton Petrella
Created By Clayton Petrella
3 News pages from "The Berliner" newspaper, December 31st 1929, that I modified in photoshop to be made to be printed on bigger newsprint.
3 News pages from "The Berliner" newspaper, December 31st 1929, that I modified in photoshop to be made to be printed on bigger newsprint.
Once printed out on sticky paper, I attached it to a bottle that looked close to the reference photos.
Reference photo for my Doornkaat bottle label.
Once printed out on sticky paper, I attached it to a bottle that looked close to the reference photos.
Once printed out on sticky paper, I attached it to a bottle that looked close to the reference photos.
This is the finished London Dry Gin bottle.
This reference photo of a 1933 bottle is what I ended up using for my project.
This is the finished London Dry Gin bottle.
This is the finished London Dry Gin bottle.
1929 French Cigarretes
(Fall 2019)
Designed by Connor Petrella
Carnage Symbiote Shoulder Mounted Puppet
(2019)
Inspired from Marvel Comics
Constructed by Clayton Petrella
Venom Symbiote Shoulder Mounted Puppet
(2019)
Designed By: MARVEL COMICS
Constructed by Connor Petrella
A cigarette box I crated in Photoshop and then had sent to Vector Works in pieces to be put together like an origami box.
A cigarette box I crated in Photoshop and then had sent to Vector Works in pieces to be put together like an origami box.
A shoulder symbiote attachment as seen in the movie "Venom"
A "Symbiote" costume piece based off of "Venom" from the movie "Venom". the piece gets attached to a harness made out of seat belts that goes on underneath the clothing. Made in 2019.
A "Symbiote" costume piece based off of "Venom" from the movie "Venom". the piece gets attached to a harness made out of seat belts that goes on underneath the clothing. Made in 2019.
"Addams Family"
Designed By: Wendy Akers
Tombstones
(2018)
To create this belt, I used a sheet of Styrene plastic, then glued on a thinner piece of Styrene plastic to give the embossed look. I used nylon strapping to create the belt itself, and to secure it, I created a hook on the backside of the buckle
Jason Garrick is The Flash of Earth 2 in the DC Comics Universe. This is my full costume. My helmet was constructed by using a fake military helmet as a base, creating an EVA foam (Gym floor mat foam) rim, Painting it silver, and EVA foam wings painted gold
Jason Garrick is The Flash of Earth 2 in the DC Comics Universe. This is my full costume. My helmet was constructed by using a fake military helmet as a base, creating an EVA foam (Gym floor mat foam) rim, Painting it silver, and EVA foam wings painted gold
To create this belt, I used a sheet of Styrene plastic, then glued on a thinner piece of Styrene plastic to give the embossed look. I used nylon strapping to create the belt itself, and to secure it, I created a hook on the backside of the buckle
Set photos with the tombstones in the background.
Using large sheets of insulation foam, I drew on designs of the various ancestors.
Set photos with the tombstones in the background.
Set photos with the tombstones in the background.
Pistol Prop
Constructed By: Connor Petrella
(2018)
Star Trek Original Series Phaser
(2018)
Inspired from designs from Paramount Television.
The Flash Ring is used by the character "The Flash". this ring is worn by his alter ego, Barry Allen. the rings intent is to store the Flash's suit, which he can change into in a flash. This ring was constructed by getting a piece of PVC pipe that fit my finger, and using more PVC to construct the logo. To see how I constructed this prop, click the link below
The Flash Ring is used by the character "The Flash". this ring is worn by his alter ego, Barry Allen. the rings intent is to store the Flash's suit, which he can change into in a flash. This ring was constructed by getting a piece of PVC pipe that fit my finger, and using more PVC to construct the logo. To see how I constructed this prop, click the link below
The Flash Ring is used by the character "The Flash". this ring is worn by his alter ego, Barry Allen. the rings intent is to store the Flash's suit, which he can change into in a flash. This ring was constructed by getting a piece of PVC pipe that fit my finger, and using more PVC to construct the logo. To see how I constructed this prop, click the link below
The phaser was a famous firearm used by Starfleet throughout the many years in space To make this Phaser, I used EVA Foam (Gym floor mat foam) to build a base, and carved out all of the details. To see how I made this prop, click the link below
Star Trek Phaser as seen in the show "Star Trek"
The phaser was a famous firearm used by Starfleet throughout the many years in space To make this Phaser, I used EVA Foam (Gym floor mat foam) to build a base, and carved out all of the details. To see how I made this prop, click the link below
The Zeta Beam
Design inspired by DC Comics
(2018).
Baby Groot as he appears in "Guardians of the Galaxy Vol. 2"
Baby Groot is a sapling version of the tree like creature that Groot is known to be This doll was constructed using EVA foam (Gym floor mat foam) To see how I constructed this prop, click the link down below
The Zeta Beam was a technological device that Adam Strange used to time travel back to Krypton before its destruction. To construct this prop, I used Eva foam (Gym floor mat foam) to scult the shape needed. Using a dollar store light, and round piece of a plastic container, I fit the light in the back, securing the cover with velcro. To see how I created this prop, click the link below
The Zeta Beam device as seen in Syfy's "Krypton" TV Show
The Zeta Beam was a technological device that Adam Strange used to time travel back to Krypton before its destruction. To construct this prop, I used Eva foam (Gym floor mat foam) to scult the shape needed. Using a dollar store light, and round piece of a plastic container, I fit the light in the back, securing the cover with velcro. To see how I created this prop, click the link below
The Zeta Beam was a technological device that Adam Strange used to time travel back to Krypton before its destruction. To construct this prop, I used Eva foam (Gym floor mat foam) to scult the shape needed. Using a dollar store light, and round piece of a plastic container, I fit the light in the back, securing the cover with velcro. To see how I created this prop, click the link below
This cape appeared in the show "Krypton" when Adam Strange Traveled back in time to the planet Krypton, and the cape was disintegrating, if the cape disappeared then Superman would disappear forever I created this by using a scrap piece of red fabric, and painting the logo, aswell as the blue on the bottom, with a little bit of glitter to simulate the disintegration. If you want to see how I made this prop, click the link below
This cape appeared in the show "Krypton" when Adam Strange Traveled back in time to the planet Krypton, and the cape was disintegrating, if the cape disappeared then Superman would disappear forever I created this by using a scrap piece of red fabric, and painting the logo, aswell as the blue on the bottom, with a little bit of glitter to simulate the disintegration. If you want to see how I made this prop, click the link below
This cape appeared in the show "Krypton" when Adam Strange Traveled back in time to the planet Krypton, and the cape was disintegrating, if the cape disappeared then Superman would disappear forever I created this by using a scrap piece of red fabric, and painting the logo, aswell as the blue on the bottom, with a little bit of glitter to simulate the disintegration. If you want to see how I made this prop, click the link below
Foam Sledge Hammer
(2017)
Porg Doll Design inspired from Lucasfilm
(2017)
The SE-14C Blaster Pistol
Designed by Lucasfilm
(2017)
A Porg as seen in the movie "Star Wars The Last Jedi"
SE-14C Blaster Pistol as seen in "Star Wars Battlefront" and the "Star Wars" Prequel Trilogy
Apple of Eden
(2017)
The Infinity Gauntlet
(2017)
The design was inspired from Marvel Studios.
Constructed by Clayton Petrella
The Green Gaurdsmen was a character that first appeared on the animated show "Justice League" Episode titled "Legends" in 2002 This ring was constructed out of a metal ring from Home Depot, with the shield being made from a drawer slide. I had a spare drawer slide, so I flattened out the metal and cut out the shield shape. because the ring I got from Home depot was too big, I wrapped string around it, and using JB Weld, I covered the string with metal glue, aswell as gluing the shield in place.
The Green Gaurdsmen was a character that first appeared on the animated show "Justice League" Episode titled "Legends" in 2002 This ring was constructed out of a metal ring from Home Depot, with the shield being made from a drawer slide. I had a spare drawer slide, so I flattened out the metal and cut out the shield shape. because the ring I got from Home depot was too big, I wrapped string around it, and using JB Weld, I covered the string with metal glue, aswell as gluing the shield in place.
The Green Gaurdsmen was a character that first appeared on the animated show "Justice League" Episode titled "Legends" in 2002 This ring was constructed out of a metal ring from Home Depot, with the shield being made from a drawer slide. I had a spare drawer slide, so I flattened out the metal and cut out the shield shape. because the ring I got from Home depot was too big, I wrapped string around it, and using JB Weld, I covered the string with metal glue, aswell as gluing the shield in place.
The Green Gaurdsmen was a character that first appeared on the animated show "Justice League" Episode titled "Legends" in 2002 This ring was constructed out of a metal ring from Home Depot, with the shield being made from a drawer slide. I had a spare drawer slide, so I flattened out the metal and cut out the shield shape. because the ring I got from Home depot was too big, I wrapped string around it, and using JB Weld, I covered the string with metal glue, aswell as gluing the shield in place.
The Apple of Eden is a technological device from the video game Assassins Creed. I constructed this prop from a clear plastic ornament, with the outer detail being made from thin craft foam. to make it glow, I used velcro to attach a flickering candle light to the inside. Click the link below to watch how I made this prop.
The Apple of Eden is a technological device from the video game Assassins Creed. I constructed this prop from a clear plastic ornament, with the outer detail being made from thin craft foam. to make it glow, I used velcro to attach a flickering candle light to the inside. Click the link below to watch how I made this prop.
The Apple of Eden is a technological device from the video game Assassins Creed. I constructed this prop from a clear plastic ornament, with the outer detail being made from thin craft foam. to make it glow, I used velcro to attach a flickering candle light to the inside. Click the link below to watch how I made this prop.
The Apple of Eden is a technological device from the video game Assassins Creed. I constructed this prop from a clear plastic ornament, with the outer detail being made from thin craft foam. to make it glow, I used velcro to attach a flickering candle light to the inside. Click the link below to watch how I made this prop.
The Infinity Gauntlet, as seen in the Marvel Comic series "Infinity Gauntlet"
Star Wars inspired Droid
(2017)
Design inspired by LucasFilm
Constructed by Clayton and Connor Petrella
Weathering Caplock Pistols
(Process Video Linked)
(2017)
Leia's Defender Sporting Blaster
Designed By: LucasFilm
(2017)
2 Caplock Pistols I bought, stripped of paint, wood stained, painted silver, and weathered with black paint. A YouTube video is linked below.
2 Caplock Pistols I bought, stripped of paint, wood stained, painted silver, and weathered with black paint. A YouTube video is linked below.
A replica prop "Defender Sporting Blaster Pistol" carried by Carrie Fishers character "Princess Leia" in "Star Wars A New Hope" Made in 2017.
A replica prop "Defender Sporting Blaster Pistol" carried by Carrie Fishers character "Princess Leia" in "Star Wars A New Hope" Made in 2017.
Stormbreaker Axe
(2017)
Design inspired from Marvel Studios
This coin purse was created by using scrap fabric, folding over the edge and sewing it down. Then I did a button stitch to create a loop to wrap a shoe lace through
This coin purse was created by using scrap fabric, folding over the edge and sewing it down. Then I did a button stitch to create a loop to wrap a shoe lace through
This coin purse was created by using scrap fabric, folding over the edge and sewing it down. Then I did a button stitch to create a loop to wrap a shoe lace through
This coin purse was created by using scrap fabric, folding over the edge and sewing it down. Then I did a button stitch to create a loop to wrap a shoe lace through
This wizard wand was created by rolling up a piece of paper, and gluing it shut. I then used hotglue to create the texture ontop of it. Finally, I painted it brown To watch the film that this wand appeared in, click the link below
This wizard wand was created by rolling up a piece of paper, and gluing it shut. I then used hotglue to create the texture ontop of it. Finally, I painted it brown To watch the film that this wand appeared in, click the link below
This wand was created by rounding off a wooden dowel rod. I created the detail with hotglue, then painted it brown.
This wizard wand was created by rolling up a piece of paper, and gluing it shut. I then used hotglue to create the texture ontop of it. Finally, I painted it brown To watch the film that this wand appeared in, click the link below
Throwing Knives
Designed By: Connor Petrella
Made By: Connor Petrella
(2016)
Connor Kenway's Tomahawk
Designed By: Ubisoft
(2016)
Arbaaz Mir's Cane Sword
Designed By: Ubisoft
(2015)
A set of 3 throwing knife props made from wooden yard sticks wrapped with regular sting for the grips. the knives where then painted with black plasti dip.
Made from yard sticks, twin wrappings, and black acrylic paint.
Made from yard sticks, twin wrappings, and black acrylic paint.
A set of 3 throwing knife props made from wooden yard sticks wrapped with regular sting for the grips. the knives where then painted with black plasti dip.
A replica of "Connor Kenway's Tomahawk" from the video game "Assassins Creed 3". the handle is carved out of wood and wood stained. the blade is made purely out of EVA foam, and the middle connection piece is wood painted silver. Made in 2016.
A replica of "Connor Kenway's Tomahawk" from the video game "Assassins Creed 3". the handle is carved out of wood and wood stained. the blade is made purely out of EVA foam, and the middle connection piece is wood painted silver. Made in 2016.
Hidden Blade
Designed By: Ubisoft
(2015)
Carved Bird Head
Designed By: Ubisoft
Made By: Connor Petrella
(2015)
This blade was made using a drawer slide and straps. Made in 2015.
Testing out 2 hidden blades.
A work in progress shot of one of my hidden blades. I used a drawer slide, and some fishing line.
This blade was made using a drawer slide and straps. Made in 2015.
a carved bird head, was going to be a topper for a cane sword.
a carved bird head, was going to be a topper for a cane sword.
This top hat was worn by the character Jacob Frye, during Victorian London. I constructed it out of thin craft foam. Click the link below to see how I constructed this prop.
This top hat was worn by the character Jacob Frye, during Victorian London. I constructed it out of thin craft foam. Click the link below to see how I constructed this prop.
Rad - X Bottle
Designed By: Bethesda Softworks
Created By: Clayton Petrella
(2014)
Phantom Blade
Designed By: Ubisoft
Created By: Connor and Clayton Petrella
(2014)
The Pip-Boy 3000 as seen in the video game "Fallout 3"
Rad-X is a medicine in the video game Fallout, and I printed the label from the video game. I used a regular pill bottle as a base, and used brown, green, and tan paint to dirty and weather the bottle. to make the pills, I took a bead, and morphed wood putty around it. When it dried, I painted each side red and yellow respectively
Rad-X is a medicine in the video game Fallout, and I printed the label from the video game. I used a regular pill bottle as a base, and used brown, green, and tan paint to dirty and weather the bottle. to make the pills, I took a bead, and morphed wood putty around it. When it dried, I painted each side red and yellow respectively
Rad-X is a medicine in the video game Fallout, and I printed the label from the video game. I used a regular pill bottle as a base, and used brown, green, and tan paint to dirty and weather the bottle. to make the pills, I took a bead, and morphed wood putty around it. When it dried, I painted each side red and yellow respectively
Rad-X is a medicine in the video game Fallout, and I printed the label from the video game. I used a regular pill bottle as a base, and used brown, green, and tan paint to dirty and weather the bottle. to make the pills, I took a bead, and morphed wood putty around it. When it dried, I painted each side red and yellow respectively
Phantom blades, made out of thin wood, and sheet metal.
The phantom blades before they were finished
Phantom blades, made out of thin wood, and sheet metal.
"WE KNOW" Letter
Designed by: Bethesda Softworks
Created by: Clayton and Connor Petrella
(2014)
Ebony Dagger
Designed By: Bethesda Softworks
Made By: Connor Petrella
(2014)
Blade of Woe dagger
Design inspired from Bethesda Softworks
(2014)
Made by tea staining a 8/11 piece of paper, covering my hand in black paint and stamping it on. The letters were painted with a brush. Made in 2014.
Made by tea staining a 8/11 piece of paper, covering my hand in black paint and stamping it on. The letters were painted with a brush. Made in 2014.
A prop replica "Ebony Dagger" from the video game The Elder Scrolls V Skyrim that I carved out of wood with a Dremel and painted with acrylic paint. Made in 2014.
A prop replica "Ebony Dagger" from the video game The Elder Scrolls V Skyrim that I carved out of wood with a Dremel and painted with acrylic paint. Made in 2014.
This dagger was carved from a block of wood, and a Dremel was used to carve the details in the hilt
The Blade of Woe as seen in "The Elder Scrolls V Skyrim".
This dagger was carved from a block of wood, and a Dremel was used to carve the details in the hilt
This dagger was carved from a block of wood, and a Dremel was used to carve the details in the hilt
This pistol was owned by Arno Dorian during the French Revolution. I constructed this pistol out of foam, and little bits of poster board. click the link below to watch how I constructed this prop.
This pistol was owned by Arno Dorian during the French Revolution. I constructed this pistol out of foam, and little bits of poster board. click the link below to watch how I constructed this prop.
This pistol was owned by Arno Dorian during the French Revolution. I constructed this pistol out of foam, and little bits of poster board. click the link below to watch how I constructed this prop.
This pistol was owned by Arno Dorian during the French Revolution. I constructed this pistol out of foam, and little bits of poster board. click the link below to watch how I constructed this prop.
Iron Dagger
Designed by: Bethesda Softworks
Created by: Clayton Petrella
(2014)
This dagger was carved from a block of wood, and a Dremel was used for the finer details and bits
An Iron Dagger as seen in "The Elder Scrolls V Skyrim".
This dagger was carved from a block of wood, and a Dremel was used for the finer details and bits
This dagger was carved from a block of wood, and a Dremel was used for the finer details and bits